Welcome to the KyleOPEN ROM for Galaxy S Duos
(Dual-Sim Phone / GT-S7562 device model)
KyleOPEN ROM Features:
- Based on stock S7562XXBMD6 ROM
- Debloated (see list of removed bloat below)
- CM9 Imported (see list of CM9 packages below)
- Deodexed / zipalligned (can be themed!)
- Rooted (incl. insecure kernel using chainfire modded adbd method)
- Custom boot image enabled
- Custom boot sounds enabled (wav only!)
- Busybox support
- Overclock / Governor Kernel
- init.d script support
- Add-on support
- OTA Update engine
- Google Now included
- Flashplayer support (download flash APK from here)
- Samsung S Voice support through add-on (see post #3)
- QtADB Support (get it here)
List of removed packages:
List of imported CM9 packages:
Installation instructions:
WARNING: Flashing this ROM will make the orange triangle appear and increase the flash counter.
Flash at your own risk, I am not responsible for your actions. Follow the instructions below ONLY if YOU
are sure of what you are doing. Otherwise stop here. You can reset the counter and remove the triangle
using the app developed by chainfire (triangle remover).
Installation Details & HowTo:
- The GT-S7562 has a download mode and a recovery mode. Both are boot modes that allow the device to
start but enter a different configuration mode than regular Android start mode. Think of them like starting
your PC and entering the BIOS instead of loading Windows as usual.
- The "download mode" is a boot mode that allows flashing bit-by-bit (very low level) data to partitions on
your device. To enter download mode on the S7562 do the following: make sure the device is well charged
(over 50%); remove all cables (this is important); power it off (don't reboot); hold volume down + home and
power on the device (volume down+home+power). Then a warning will be displayed on screen. You must
press Volume Up to enter download mode.
- As long as you can enter "download mode" you can recover your device. While in download mode, you
can use the ODIN tool to flash recovery, boot and ROM images.
- The "recovery mode" is a boot mode that allows "safe mode" changes to be performed on the device.
This is done using CWM, a tool that can be used to automate Android system changes to system files, partitions etc. To enter recovery mode on the S7562 do the following: make sure the device is well
charged (over 50%); remove all USB cables (this is important); power it off (don't reboot); keep volume
up + volume down + home and power on your device.
- To navigate in recovery mode, use the volume buttons to change active selection and the home button
to make selections. The back button works as back button. When done working with recovery, go back
all the way and select option to reboot system to boot your device normally.
- Before installing KyleOpen ROM, make sure you are running XXBMD6 as base ROM. If you skip
this step, you may have network and signal problems after installing KyleOpen ROM. So, download the
ROM image here and flash it from download mode using ODIN and PDA button BEFORE you continue!!!
Update Instructions:
Note: The recovery ZIP also contains the stock recovery image. The stock ROM can also be found onhttp://www.sammobile.com
Mirrors for use without OTA updater:
Alternate download methods in case you don't want or can't use the OTA update utility can be
found below. Download the ZIP files, copy them to your device and reboot in CWM to flash them.
(Dual-Sim Phone / GT-S7562 device model)
KyleOPEN ROM Features:
- Based on stock S7562XXBMD6 ROM
- Debloated (see list of removed bloat below)
- CM9 Imported (see list of CM9 packages below)
- Deodexed / zipalligned (can be themed!)
- Rooted (incl. insecure kernel using chainfire modded adbd method)
- Custom boot image enabled
- Custom boot sounds enabled (wav only!)
- Busybox support
- Overclock / Governor Kernel
- init.d script support
- Add-on support
- OTA Update engine
- Google Now included
- Flashplayer support (download flash APK from here)
- Samsung S Voice support through add-on (see post #3)
- QtADB Support (get it here)
List of removed packages:
Code:
AccuweatherDaemon.apk AccuweatherWidget_Remote.apk AllshareService.apk AnalogClockSimple.apk AnalogClockUnique.apk ChatON_MARKET.apk ChocoEUKor.apk ChromeBookmarksSyncAdapter.apk DeepSea.apk DigitalClock.apk Divx.apk DualClockAnalog.apk DualClockDigital.apk FotaClient.apk GameHub_2.0_ICS_WVGA.apk Gmail.apk HelvNeueLT.apk Kies.apk kieswifi.apk MobilePrint.apk MusicFX.apk MusicPlayer.apk MyFiles.apk PlusOne.apk PolarisViewer.apk RoseEUKor.apk SamsungApps.apk SamsungAppsUNA3.apk SamsungIME.apk Samsungservice.apk SamsungTTS.apk sCloudBackupApp.apk sCloudBackupProvider.apk sCloudDataRelay.apk sCloudDataSync.apk sCloudSyncBrowser.apk sCloudSyncCalendar.apk sCloudSyncContacts.apk SecCalculator2.apk SecMemo.apk SecMemoWidget.apk SlideShow.apk SNS.apk Talk.apk talkback.apk VideoPlayer.apk VoiceRecorder.apk WeatherWall.apk YahoonewsWidget.apk YahoostockWidget.apk
List of imported CM9 packages:
Code:
- CM9 Apollo Player (add-on) - CM9 Keyboard - CM9 Launcher (Hello Trebuchet!) - CM9 EMail & Exchange - CM9 Browser - CM9 Gallery (add-on) - CM9 File Manager - Magic smoke live wallpapers
WARNING: Flashing this ROM will make the orange triangle appear and increase the flash counter.
Flash at your own risk, I am not responsible for your actions. Follow the instructions below ONLY if YOU
are sure of what you are doing. Otherwise stop here. You can reset the counter and remove the triangle
using the app developed by chainfire (triangle remover).
Installation Details & HowTo:
- The GT-S7562 has a download mode and a recovery mode. Both are boot modes that allow the device to
start but enter a different configuration mode than regular Android start mode. Think of them like starting
your PC and entering the BIOS instead of loading Windows as usual.
- The "download mode" is a boot mode that allows flashing bit-by-bit (very low level) data to partitions on
your device. To enter download mode on the S7562 do the following: make sure the device is well charged
(over 50%); remove all cables (this is important); power it off (don't reboot); hold volume down + home and
power on the device (volume down+home+power). Then a warning will be displayed on screen. You must
press Volume Up to enter download mode.
- As long as you can enter "download mode" you can recover your device. While in download mode, you
can use the ODIN tool to flash recovery, boot and ROM images.
- The "recovery mode" is a boot mode that allows "safe mode" changes to be performed on the device.
This is done using CWM, a tool that can be used to automate Android system changes to system files, partitions etc. To enter recovery mode on the S7562 do the following: make sure the device is well
charged (over 50%); remove all USB cables (this is important); power it off (don't reboot); keep volume
up + volume down + home and power on your device.
- To navigate in recovery mode, use the volume buttons to change active selection and the home button
to make selections. The back button works as back button. When done working with recovery, go back
all the way and select option to reboot system to boot your device normally.
- Before installing KyleOpen ROM, make sure you are running XXBMD6 as base ROM. If you skip
this step, you may have network and signal problems after installing KyleOpen ROM. So, download the
ROM image here and flash it from download mode using ODIN and PDA button BEFORE you continue!!!
- Download to your PC the custom recovery image that enables CWM, if you don't have it already, from here
- Reboot in download mode to flash CWM
- Unzip the file in your computer and start ODIN.
- Click the PDA button and select the "kyleopen-cwm5-v3.tar.md5" file.
- Connect your phone that is already in download mode. ODIN will display it as being connected
- on a COM port.
- Do not change any other options. Just click the "Start" button and wait. In about 1 minute, on
- your device there will be a loading bar displayed. Once done the phone will reboot itself normally
- . ODIN will tell you the flash was OK and restart your device. This operation will increase the flash counter and make the orange warning triangle appear. This is normal and is not a problem.
- From this point on, you can boot in recovery mode and flash CWM zips.
- Let the phone restart normally and boot up completely. Now you are ready to upgrade your
- stock ROM to KyleOPEN ROM.
Update Instructions:
- Make sure you are running a proper stock ROM (like XXBMD6 or any version of KyleOPEN
- ROM)
- Download the OTA update utility app attached to this post and install it if you didn't already.
- Run the KyleOpen Tools and check for updates. If your ROM does not have root access it's
- gonna be slow to start and may not show the proper information, but the update check and
- download will work just fine.
- Download the update and save it.
- Press reboot in recovery mode.
- Install the downloaded zip.
- Clear cache and davlik cache.
- Reboot system.
- Hit the thanks button or you will be ignored in the thread!
Note: The recovery ZIP also contains the stock recovery image. The stock ROM can also be found onhttp://www.sammobile.com
Mirrors for use without OTA updater:
Alternate download methods in case you don't want or can't use the OTA update utility can be
found below. Download the ZIP files, copy them to your device and reboot in CWM to flash them.
- Main update server: http://www.reloaded.ro/kor-updates/KOR-Release-340.zip
- Google drive: https://docs.google.com/file/d/0B_NL...it?usp=sharing
Credits:
Cheers,
C.
Code:
- Project Flulid team, for build.prop tweaks - leolawliet for disabling of CPU rendering - Mirko ddd for back button to kill app mod - einst31n for the facelift of the ROM logo and the default theme - VamshiStunner for his awesome work on the kernel, especially OC! - hybridmd, for the init.s script add-on to swap SD memory cards - P.thina for finding the fix for no network that some users had!!!! - nakedninja42 for face unlock tips - Samsung for the device and software development - Google and the Android community for an awesome OS - The CM9 team for their work on ICS - XDA Developers for letting us post our work, help others and unleash our devices - dsixda & chainfire for their previous work on Samsung devices - Everyone else out there that makes this worth the effort...
C.
Next Version Changelog:
Older Changelog:
FAQ & Known Issues:
Resolved Issues:
- Next version - Nothing yet... only bug fixes are planned from now on.
Older Changelog:
- v3.4.0 - Fixed the volume increments issues
- v3.4.0 - Fixed the flickering EGL configuration problem (thanks chinna_rao!)
- v3.4.0 - Small changes to the framework.jar (performance tweaks)
- v3.4.0 - Disabled CPU rendering (better battery life, smoother graphics)
- v3.4.0 - Added 54 build.prop tweaks (battery, GPU, download speed etc.)
- v3.3.0 - Switched to new base S7562XXBMD6
- v3.3.0 - Added a new theme based on einst31n's work
- v3.3.0 - CSC Tweaks (number of contacts, camera sound, other settings)
- v3.3.0 - Updated Google Now port for new base
- v3.2.0 - Memory tweaks (minfree, swappiness, cache, dirty)
- v3.2.0 - Menu button hold to kill app
- v3.2.0 - New system theme by einst31n
- v3.2.0 - New update push notification support
- v3.2.0 - Automatic / manual update checks
- v3.2.0 - Re-design of the OTA update utility interface
- v3.2.0 - Enable/disable custom boot sounds (KOR v3.1.0 and later)
- v3.1.0 - OTA Update engine (finally!!!)
- v3.1.0 - Default kernel with no OC (safer!)
- v3.1.0 - Added reboot recovery application
- v3.1.0 - Redone SystemUI quickbuttons
- v3.1.0 - Custom bootsounds support
- v3.0.0 - Added back OC to KOR kernel, based on initial work by VamshiStunner
- v3.0.0 - Added interactiveX and savagedzen governors
- v3.0.0 - Added vr & sio scheduler
- v3.0.0 - Added support for more than 5 joined contacts (thanks thunder72)
- v3.0.0 - Modified initlogo.rle boot image
- v3.0.0 - Included Kernel in ROM package
- v3.0.0 - Updated Google Now to a more stable version
- v3.0.0 - Added CM9 File Manager
- v3.0.0 - Tweaked memory control (should be even smoother now)
- v3.0.0 - Added face unlock add-on (see post #3)
- v2.1.2 - Added removed APKs add-on
- v2.1.2 - Added CM9 Gallery add-on
- v2.1.2 - Added CM9 Apollo add-on
- v2.1.2 - Added stock gallery add-on
- v2.1.2 - Added stock launcher add-on
- v2.1.2 - Added stock keyboard add-on
- v2.1.2 - Fixed a HUGE bug with email draining battery
- v2.1.2 - Released recovery image v3 with support for internal and external SD
- v2.1.1 - Re-added some bloat to allow welcome wizard to function
- v2.1.1 - Fixed black screen of death bug introduced in v2.1
- v2.1.1 - Overclocking support by VamshiStunner in kernel (v5)
- v2.1.1 - Changed camera back to stock Samsung
- v2.1.1 - Added stock theme add-on (see post #3)
- v2.1.1 - Added MIUI camera as add-on (see post #3)
- v2.1.1 - Added swap SD add-on (see post #3)
- v2.1.0 - Removed all of the possible bloatware
- v2.1.0 - Fixed gallery recent photo glitch
- v2.1.0 - Added CM9 browser
- v2.1.0 - Added CM9 email client
- v2.1.0 - Added MS Exchange support
- v2.1.0 - Switched to MIUI camera app.
- v2.1.0 - Added Google Now
- v2.0.0 - Speed and stability increases (20% smoother on average)
- v2.0.0 - Further removed useless packages from the stock ROM
- v2.0.0 - Fixed the annoying bug that prevented the WebKit from working correctly
- v2.0.0 - Media updates (CM9 Imported)
- v1.0.3 - QtADB Support
- v1.0.3 - New kernel release (v3) with added init.d support, additional governors (by VamshiStunner) and "adb root" support
- v1.0.3 - First public release
FAQ & Known Issues:
- I am on stock version XXXXXX, will KyleOPEN ROM work? - I have no idea. Try it and report back. In case you get network problems try a different base. Use XXBMD6 as base whenever possible.
- What baseband is supported - Baseband is not affected by this ROM, it does not change it and any baseband version is compatible.
- My CSC is "unknown", why? - That is normal and the phone works correctly. It works in roaming and all providers.
- My phone requests unlock code - You must unlock EFS to use it on other networks if you purchased it on a contract. This ROM does not unlock your network.
- Notification quickbuttons missing - This is normal. If you want them back flash the "Stock Samsung Theme v1" add-on in post #3 below.
- I want stock theme back! - If you want the stock icons and colors back, then flash the "Stock Samsung Theme v1" add-on in post #3 below.
- Direct Call widgets don't work - These widgets are part of the Trebuchet launcher and only work on CM9. In KyleOPEN, they will not work, due to a couple of intent security limitations. There is no workaround for this problem. If this is bothering you, use another launcher or don't use these widgets.
- Browser white address bar problem - I have no idea what causes this. It is only for some browsers. Use Google Chrome to avoid this problem.
- Cannot change lock screen wallpaper - Go to settings->wallpaper and choose to change both wallpapers. Apply any live wallpaper. Then set a new wallpaper with your favorite app. Alternately, install stock gallery (see post #3 belov), change lock screen wallpaper and then remove or disable it.
- Where is kernel OC??? - The default ROM package starting with version 3.1 does not come with OC as it's unstable and not all users need it. For OC support, install a compatible kernel with OC support from post #3 below.
- How can I get back to stock? - You must download a compatible image from samfirmware.com and flash it using ODIN.
- XXXX doesn't work correctly, what can I do? - Follow the installation steps in the first post. There are no known bugs (things that don't work) in the ROM.
- Some applications force close after installing the ROM - This happens because you did not follow the installation steps provided. Reboot in recovery mode and clear cache and dalvik cache.
Resolved Issues:
Front-facing camera photos- Camera app can't switch to front facing camera. This is because of the MIUI camera app and is intended. Front facing camera works in other apps such as Skype.Camera recent photo- After taking a picture using the stock camera only the Samsung Gallery can be used to open the recent photo (bottom corner preview). Will be replaced by MIUI camera in the next update to allow camera integration with any gallery app.Default browser and all apps that require WebKit- Netflix authentication, 9GAG Facebook login, default browser and any other app that relies on WebKit will crash. I have no clue what breaks this but I am looking into it.Signal lost and call problems on *some* devices- Reported by multiple ROM users. Seems to happen only in some areas and might be related to CSC or the modem version being used. I have no way of testing this and might take some time to find a fix because of this. I am considering moving to a new base and see if this fixes the problem. Might also be kernel-related...
List of compatible Themes:
Flash the themes by rebooting in recovery mode and using CWM to install ZIP. It's a good idea to clear caches and dalvik before testing them out:
List of compatible Add-Ons:
These add-ons provide additional functionality to the ROM and do not bork already existing features. None of them are mandatory and you can install only the ones you want. To remove an add-on that was flashed using CWM, simply reinstall the KyleOPEN ROM again and the add-ons you want to keep. There is no other way to uninstall a CWM package with ease.
List of other compatible packages (not mine, not tested, don't ask about them):
List of compatible kernels:
Please note: Regular users should stick with the kernel version included in the ROM by default. If you encounter issues with any of these other kernels, flash the ROM again using CWM to restore the default kernel.
Flash the themes by rebooting in recovery mode and using CWM to install ZIP. It's a good idea to clear caches and dalvik before testing them out:
- Greenblast Theme by charles111 - Get it here: https://www.dropbox.com/s/2dm0w4hc69...st%20v2.00.zip (theme thread here)
- PurpleGlow Theme by Mohitash - Get it here: http://forum.xda-developers.com/show...php?p=42058670
- BlueGlow Theme by Mohitash - Get it here: http://forum.xda-developers.com/show...php?p=42093164
- CyanGloss Theme by Mohitash - Get it here: http://forum.xda-developers.com/show...php?p=42170668
- BlueGloss Theme by Mohitash - Get it here: http://forum.xda-developers.com/show...php?p=42194443
List of compatible Add-Ons:
These add-ons provide additional functionality to the ROM and do not bork already existing features. None of them are mandatory and you can install only the ones you want. To remove an add-on that was flashed using CWM, simply reinstall the KyleOPEN ROM again and the add-ons you want to keep. There is no other way to uninstall a CWM package with ease.
- Remove menu-to-kill feature - Flash using CWM. This will disable the feature to kill running apps by holding the menu button.
- FaceUnlock - Flash with CWM. Will enable face unlock in security settings after boot.
- CM9 Gallery - Flash with CWM. Installs the CM9 gallery and video player.
- CM9 Apollo Media Player - Flash with CWM. Installs the CM9 media player Apollo.
- Stock Gallery - Flash with CWM. Installs the stock Samsung Gallery (allows you to change wallpapers and everything)
- Stock Keyboard - Flash with CWM. For those of you that miss the stock Samsung keyboard.
- Stock Launcher (TW) - Flash with CWM. Installs the stock launcher and hogs the phone again. Also for the nostalgic types.
- MIUI Camera - Flash with CWM. Replaces stock Samsung camera to fix recent photo bug. Does not support 5MP mode and cannot be configured to save photos to SD.
- Swap SD cards - Flash with CWM. Switches the internal memory and external microSD cards between them to allow downloading of HD games and apps that need lots of space on the internal SD. BEWARE: Doing this will automatically make the kernel go haywire and battery impact is considerable. You will not see the errors (apps run fine), but the phone will enter sleep mode very rarely due to the checks it does constantly. However, it is completely safe and no functionality is lost (thanks to hybridmd for the init.d script!)
- Samsung S Voice - Copy to device and flash using CWM zip installation. Original work and hacks by Wanam for SGS2.
- Stock Samsung Theme v1 - Flash using CWM to revert to how the phone UI looks while stock.
- Blue ICS Theme v1 - Flash using CWM. Changes the touch sounds from the annoying bubbles to CM9 sounds, changes boot animation to Nexus 7 one, changes UI to blue theme and remake of SIM icons (not in settings yet). Screens attached. This is the default since v2.x of the ROM so there will be no change if you flash it.
- All removed APKs - Flash with CWM. This 120MB package includes all removed APKs from the stock ROM. Flashing this will undo my work in 30 seconds, making your phone near stock, but deodexed.
List of other compatible packages (not mine, not tested, don't ask about them):
- XperiaZ walkman player with clearaudio+ and xloud, Note2 Gallery & Player from the Galaxy Grand Duos. Thanks dising007
- CrossBreeder Lag reducer - Some users reported better performance with it installed. Thanks to idcrisis for posting it in the forums!
List of compatible kernels:
Please note: Regular users should stick with the kernel version included in the ROM by default. If you encounter issues with any of these other kernels, flash the ROM again using CWM to restore the default kernel.
- GitHub link to the KyleOpen 4.0.4 Kernel: https://github.com/cheatman-xda/kyleopen-kernel
- KyleOPEN Kernel v5 - Stock kernel with additional CPU governors, overclocking support, init.d script support, root enabled. Flash directly with ODIN. Credits go to VamshiStunner for his work on governors in this kernel version.NOTE: Although it seems to have OC, it is not working. Setting OC values will not boost the phone's performance as it will run at 1GHz no matter how you configure it.
- KyleOpen ROM Kernel OC1 - Bleeding edge kernel with increased sensitivity, all features activated and custom boot logo image. Only for the hardcore fans and power-users of KOR that know what they're doing.
- xvasek2 - Breakfast Kernels - OC Kernels for everyone, plenty of speeds to choose from. If you really want OC and can't get around with any setup, use these kernels confidently. Don't forget to follow the instructions and check your balls (or instincts for the ladies!) before you proceed. All kernels should be flashed using ODIN.
enjoy////// a grate tnks to cheatman xda//////
0 comments:
Post a Comment